Handcrafted Black Leather Biker Wallet with Sterling Silver Skull Snap
SKU: 3604
A cast skull with a notched ring through its teeth is the only ornament on this 4¼″ × 7⅜″ long wallet. Everything else is 2mm black cowhide, hand-stitched in black waxed thread, with no tooling and no inlay. The Handcrafted Black Leather Biker Wallet with Sterling Silver Skull Snap closes with a .925 sterling silver skull on the strap tip. A matching sterling chain grommet is set at one end of the fold. Inside are seven card slots, three bill compartments and a zippered coin pocket.
Who This Is Actually For
If the same wallet goes to work and to the bike — black thread on black leather keeps the body completely plain. The skull is a single small casting positioned at the strap tip. On an office desk it passes for an ordinary long wallet. Best for riders who carry one wallet everywhere.
If you still pay in paper currency — the body measures 7⅜ inches long, more than a 6.14-inch US bill. Three full-length bill compartments let you separate denominations without folding anything. The zippered pocket keeps loose coins away from the cash.
If you already own a chain — the sterling grommet is installed at the corner where the wallet folds. Inside, its star-shaped back is visible at the end of the zipper, and a standard chain clip attaches immediately.
What It's Like to Carry (The Honest Take)
Look closely at the skull and it's grinning. The teeth are cut sharp, the eye sockets are darkened, and a ring runs straight through the mouth. The ring itself isn't smooth: its outer edge is notched all the way round, almost like a miniature gear. Tip the wallet on its side and the ring swings loose below the jaw.
The cowhide is smooth with a soft sheen. Up close you can see a fine natural grain and a few faint creases, so the surface reads as genuine leather, not coated plastic. The thread is noticeably heavy. Every stitch lies at a slight slant and stands up from the leather, so the edges carry visible texture even though everything is black.
The outline isn't a simple rectangle either. The top edge descends in a shallow curve, and the strap travels up from the back panel, over that edge and onto the front. It finishes in a teardrop-shaped tip, stitched around its entire border, with the skull positioned at its center.
Open it and the upper panel displays a stepped row of upright card slots, each with a gently waved top edge. A zipper runs the length of the wallet below them, set into a finely grained black divider. The lower panel has two wider pockets separated by a stitched seam.
One honest complaint carries over from the original listing: the coin pocket's zipper pull is a small tab. With thick fingers or riding gloves, you'll probably fumble it. A short loop of cord tied through the pull solves that in a minute.
The Specs — And What They Actually Mean
- 📏 Size: 4¼″ × 7⅜″ long format — longer than a US bill, so currency travels unfolded.
- ⚙️ Leather: 2mm genuine cowhide, approximately 5 oz in leather-weight terms, in black.
- 🔧 Hardware: .925 sterling silver skull snap holding a notched ring, plus a .925 sterling silver chain grommet at the fold.
- 💳 Layout: seven card slots, three full-length bill compartments and a zippered coin pocket.
- 🛡️ Stitching: hand-stitched in black waxed thread around every edge, including the strap tip.
- 💎 Finish: smooth surface with a soft sheen, with natural grain visible up close.
Questions You're Probably Asking
What is the notched ring under the skull for?
It's a loose ring held in the skull's jaws, and it's the only free-moving metal on the exterior. The outer edge is notched all the way round, which gives a fingertip something to catch when you lift the strap. Turn the wallet on its side and the ring drops below the cast .925 sterling skull.
Where do the seven card slots sit?
Most of them occupy the upper panel as a stepped row of upright slots, each with a gently waved top edge. Below them, a zipper runs the length of the wallet. The lower panel holds two wider pockets separated by a stitched seam, and three bill compartments provide room for currency.
Is it really hand-stitched?
Yes. Every seam is hand-stitched in black waxed thread through 2mm cowhide. Up close, each stitch sits at a slight angle and is raised above the surface, which is easiest to see around the teardrop strap tip. Black thread on black leather keeps the stitching as texture, so the silver skull remains the only bright point.
Quick Specs & Real-World Performance
| Technical Detail | What It Actually Does for You |
|---|---|
| .925 sterling silver skull snap | The single piece of decoration, positioned where your thumb opens the strap |
| Notched ring in the skull's jaws | A loose ring your fingertip can catch to lift the strap |
| 2mm genuine cowhide, approximately 5 oz | Holds its shape when loaded and still folds closed |
| Black waxed thread, hand-stitched | Raised stitches add texture without adding color |
| 4¼″ × 7⅜″ long format | US currency fits full length in three compartments |
| Seven card slots + zippered coin pocket | Cards stand upright in a stepped row; coins stay zipped away |
| .925 sterling silver chain grommet | Accepts a standard chain clip at the folded corner |
You Might Also Want
The tribal star wallet with red snakeskin shares the long black body and the skull concho on the strap. It adds a red snakeskin star across the front panel.
For a plain wallet in a warmer color, the cognac wallet with sterling flame snaps eliminates the strap and closes with two conchos.
The grommet is ready now. Choose a chain from our biker wallet chains, or explore the complete biker wallets collection.
