Cross Biker Chain Wallet — Black Lizard Inlay on Cowhide
SKU: R1430
An iron cross in glossy black lizard skin sits at the center of the front cover. A thick raised leather border outlines its flared arms. Around it, the body is 3mm full-grain cowhide with a pebbled black grain. Two swirl-cast conchos hold the cover shut. The Cross Biker Chain Wallet measures 6⅛″ × 3½″, with two zip compartments and three long compartments inside.
Who This Is Actually For
If you want a cross that reveals itself gradually — lizard and cowhide are both black here. The cross appears through gloss and scale pattern alone. Best for riders who like the motif without a bright inlay.
If you maintain your own gear — both conchos are held by slotted screws visible inside the cover. A small flat screwdriver reaches them directly. Best for riders who would rather tighten a fitting than replace a wallet.
If coins and small parts need separate storage — one zipper crosses the inside of the cover. A second closes a pocket on the body panel, and three long compartments sit behind them. There are no individual card slots.
What It's Like to Carry (The Honest Take)
The lizard scales are small and tightly arranged in rows, with an almost liquid shine. The cowhide around them has a coarse pebbled grain and much lower sheen, so the cross reads through texture alone. Its raised border stands noticeably above both surfaces.
The conchos occupy the two outer corners of the cover. Each is cast in swirling flame shapes with darkened recesses. Each one fastens onto a silver-tone stud on the body panel.
Open the cover and its interior reveals a straight silver-tone zipper extending almost edge to edge. Two brass-toned slotted screw heads sit in the corners, directly behind the conchos. Below, the body panel carries a pocket with its own zipper along the top. The chain grommet is positioned at the spine end.
At 6⅛″ wide, the wallet is fractionally shorter than a US bill, which measures approximately 6.14″. Currency therefore won't lie completely flat without folding.
The hand-tooled iron cross bifold uses the same cross shape, filled with black stingray and surrounded by carved bones and skulls. This one keeps the body undecorated and lets the lizard carry the design.
The Specs — And What They Actually Mean
- ⚙️ Body: 3mm full-grain cowhide with a pebbled black grain, undecorated on the back.
- 💎 Front: iron cross in genuine black lizard skin, framed by a raised leather border.
- 🔧 Hardware: two 925 sterling silver flame snaps on screw posts, closing onto silver-tone studs.
- 💳 Storage: three long compartments plus two zip compartments, with no individual card slots.
- 📏 Size: 6⅛″ × 3½″ — a slim, elongated format sized for a back pocket.
- 🛡️ Construction: double-stitched stress points and a reinforced grommet that takes up to a 3/8″ chain. The chain is sold separately.
Questions You're Probably Asking
What are the brass-toned screws inside the cover?
They anchor the 2 sterling silver conchos decorating the front. Each concho is mounted on a screw post, and its slotted head sits in a corner on the inside of the cover. If a concho ever works loose, a small flat screwdriver tightens it from inside without removing anything else.
Why does the cross shine when the surrounding leather doesn't?
Because it's an entirely different hide. The cross is genuine black lizard skin with small, glossy scales in tight rows. The body is 3mm cowhide with a coarse pebbled grain and much lower sheen. Both are black, so the difference in shine and texture is what outlines the cross.
How does this differ from the lizard cross bifold on shark skin?
Mainly in format and body leather. Both use genuine black lizard for the cross. The bifold measures 4⅝″ × 3⅞″ with braided edges, five card slots and a flap-covered coin pouch. This one is 6⅛″ × 3½″ in pebbled cowhide, with two sterling conchos, three long compartments and two zip compartments.
Quick Specs & Real-World Performance
| Technical Detail | What It Actually Does for You |
|---|---|
| Black lizard iron cross | A second genuine hide, visible through gloss on an all-black wallet |
| Raised leather border | Outlines the cross shape and stands above the surrounding grain |
| 3mm pebbled cowhide | A substantial, low-sheen body with an undecorated back |
| 925 sterling flame snaps on threaded screw posts | Closure fittings you can tighten from inside the cover |
| Zipper across the inner cover | A separate sealed compartment for flat items |
| Zip pocket on the body panel | Coins and small parts kept apart from the long compartments |
| 6⅛″ × 3½″ | Slim, elongated format, fractionally shorter than a US bill |
| Reinforced grommet, up to 3/8″ chain | A chain anchor independent of the snap closure |
You Might Also Want
Lizard covers every surface of the black lizard biker wallet with sterling snaps, built on this identical flap format. On a smaller body, the lizard cross bifold on shark skin adds braided edges and a flap coin pouch.
For carving around the cross, see the hand-tooled iron cross wallet with a stingray inlay. Bones and skulls surround its cross.
This wallet ships without a chain. Browse the wallet chains for one that fits the grommet, or compare designs in the biker wallets range.
